Home › Slab Leak Rerouting

Temecula Leak Experts · Open 24 hours

Slab Leak Rerouting in Temecula

A leak under your slab doesn’t always mean jackhammering your floor. With a reroute, the leaking pipe stays where it is, under the concrete, and is taken out of service. A new water line is run through your walls or attic to replace it.

Temecula Leak Experts provides slab leak rerouting for homeowners in slab-foundation homes across Temecula.

Call Now: 1 (951) 355-0459When Rerouting Makes Sense
Locally owned in Temecula100+ projects completedOpen 24 hours
Cross-section of a home's concrete slab with a copper water line under the floor

The basics

What Is Slab Leak Rerouting?

Slab leak rerouting is a repair that bypasses a leaking water line under your concrete slab instead of breaking the concrete to fix it. The leaking line is disconnected and capped, and a new line is installed above the slab, usually through walls or the attic, to deliver water to the same fixtures.

  • The old pipe stays under the slab, unused.
  • Nothing under your floor needs to be dug up.

Is it the right fit?

When Rerouting Makes Sense

Rerouting is usually the better choice when breaking the slab would cause more damage, cost, or risk than running a new line. It tends to fit when:

The leak is under something hard to remove, like kitchen cabinets, tile, or hardwood flooring.

The same line has leaked before, so patching it again would just leave you with more old pipe.

You want to avoid concrete work inside your living space.

The leaking line serves a limited area, such as one bathroom or the kitchen, so the new run is reasonably short.

Rerouting may not be the best fit when the leak is in an easy-to-reach spot on otherwise healthy pipe. In that case, a spot repair can cost less. It can also be harder in homes with vaulted ceilings or very limited attic access, because there’s less room to run the new line.

We’ll explain which option fits your home, and why, before any work is approved. For a side-by-side look at all the options, see our slab leak repair page.

Compare

Reroute vs. spot repair at a glance

Spot repair

What happens
Concrete is opened over the leak and the pipe section is fixed

Your floor
Opened over the leak, then restored

Openings at home
One opening in the floor

What you end up with
Repaired old pipe

Reroute

What happens
Leaking line is capped; a new line runs through walls or attic

Your floor
Left untouched

Openings at home
Small drywall openings, then patched

What you end up with
New pipe for that run

Know the difference

Reroute vs. Repipe: What’s the Difference?

A reroute replaces one leaking line. A repipe replaces the water lines throughout the house. Homeowners often hear these terms used interchangeably, but they’re very different jobs with very different price tags.

A single slab leak doesn’t automatically mean you need a repipe. A repipe starts to make more sense when leaks keep happening in different places or the pipe is deteriorating throughout the house. If you’ve been quoted a repipe for a single leak, it’s fair to ask why.

  • Reroute: One failed line is bypassed with a new run.
  • Whole-house repipe: The home’s supply lines are replaced.

Your quote

What affects the price

Call Now for a quote on your home: 1 (951) 355-0459
  • How long the new line needs to be, from the water source to the fixtures it serves
  • The path it takes, whether through the attic, interior walls, or a combination
  • Which line is being replaced, hot or cold
  • How many fixtures the line serves
  • How many wall openings are needed, and how much patching follows

Our process

How a Slab Leak Reroute Works

1

We confirm which line is leaking.

For a reroute, the key is identifying which water line has failed. That’s the line that gets bypassed.

2

We plan the new route.

We look at your walls, attic access, and fixture locations to find the shortest practical path.

3

We make small access openings in drywall where the new line needs to connect or pass through.

4

We run the new line and connect it to the existing plumbing at each end.

5

We cap the old line, so the leaking section under the slab no longer carries water.

6

We test the new line.

7

We close the openings.

At home

What to Expect at Home

A reroute is usually much less disruptive than cutting into a concrete floor, but it isn’t invisible. Here’s what to plan for:

  • Wall openings: Expect a few small openings in drywall near where the line connects, and possibly along the route.
  • Attic access: If the line runs through the attic, someone will need to get into it, so clear the area around the attic hatch.
  • Noise and dust: Much less than concrete cutting. Some drywall dust is normal near the openings.
  • Before we arrive: Move furniture and belongings away from the walls in the affected rooms.

Before you approve

Questions to Ask Before Approving Any Reroute

Whoever you hire, these questions help you compare quotes fairly:

  • Which line is leaking, and how was that confirmed?
  • What route will the new line take, and how many wall openings will there be?
  • What pipe material will be used?
  • Is drywall patching included, and does it include texture and paint?
  • Is a permit part of the job, if one is required?
  • What’s the warranty, and who honors it?
  • Why a reroute instead of a spot repair or a repipe?

Meet the team

Who Does the Work

Our technicians include:

MA

Mike Anderson

5 years of plumbing experience, specializing in leak detection.

DC

Daniel Carter

6 years of experience and more than 70 completed projects.

Temecula Leak Experts has completed over 100 projects.

Call Now: 1 (951) 355-0459

Service area

Temecula Neighborhoods We Serve

Temecula Leak Experts is based at 27637 Commerce Center Dr in Temecula. We provide slab leak rerouting in these neighborhoods:

RedhawkHarvestonWolf CreekPaloma Del SolCrowne HillMorgan HillPaseo Del SolTemeku Hills
Call Now: 1 (951) 355-0459Get Directions

FAQ

Frequently Asked Questions

The leaking section under the slab is taken out of service for good, so that leak can’t come back. Other old pipes in the house can still fail over time, which is why the condition of your remaining plumbing matters when deciding between a reroute and a repipe.

Not always easily. Vaulted ceilings, very limited attic space, or the location of the fixtures can make a reroute harder or more expensive. In those cases, a spot repair may be the better option. We’ll tell you which makes more sense after looking at your home.

It depends on your policy. Many policies cover resulting water damage, and sometimes the cost of accessing the leak, when the leak was sudden and accidental. The cost of replacing the failed pipe itself is often excluded. Check your own policy with your insurance provider.

Yes. Before rerouting, the leaking line needs to be confirmed, so the right line gets bypassed. If you haven’t had the leak located yet, start with slab leak detection.

We’re open 24 hours. If water is actively coming up through the floor, shut off your main water valve first.

Talk to us

Call Temecula Leak Experts About Slab Leak Rerouting

If you’d rather not break your floor to fix a slab leak, a reroute may be the right answer. Call us, tell us what’s happening, and we’ll help you figure out whether rerouting fits your home and what it would cost.

Call Now: 1 (951) 355-0459

Temecula Leak Experts

1 (951) 355-0459

Address: 27637 Commerce Center Dr, Temecula, CA 92590

Email: info@slableakdetectiontemecula.com

Hours: Open 24 hours, emergency service available

Get directions →